Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 0.51MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 0.51 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG MFLEX TYGON ELFL 87 10FT
Masterflex B/T PerfectPosition Pump Tubing, Tygon S3™ E-LFL, B/T 87; 10 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX SILICONE 25 20/CS
Masterflex L/S Bulk-Packed Precision Pump Tubing, Platinum-Cured Silicone, L/S 25; 20 Bags of 25 ft/Bg, Avantor
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 2-Stop, Peroxide-Cured Silicone, 1.65 mm ID; 6/PK
Appearance: Opaque Temperature: -70 to 52¿C Life at 100 rpm: 1000 hrs The first of a series of two-stop extension tubing options is below under Accessories. See all of our two-stop extension tubing formulations or contact our Application Specialists for personal assistance.
Braintree Scientific Polyethylene .015"""" x .043"""" Per Ft.,200 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
AVANTOR MASTERFLEX (VWR LLC) PUMP TUBING FDA COMPLIANT 50FT
NC3357067 PUMP TUBING FDA COMPLIANT 50FT
AVANTOR MASTERFLEX (VWR LLC) Bev-A-Line B-5 V Tubing, 1/8""ID x 1/4""OD, 50 ft/pack
Applications: Safe for food, beverage, drug, lab, and general use¿can withstand higher temperatures than Bev-A-Line IV tubing. Safe for most alcohols; avoid strong solvents. Characteristics: Polyethylene liner cross-linked to ethyl vinyl acetate shell. No plasticizers. Nontoxic and nonhemolytic. Needs no connectors¿heat-bondable. Translucent. Certification: Resin is FDA-compliant (liner: 21 CFR 177.1520; shell 21 CFR 177.1350). Meets USP Class VI, USDA, and National Formulary requirements. Temperature range: ¿60 to 200¿F (¿51 to 93¿C) Sterilize: With autoclave, ethylene oxide, or dry heat.